吃奶呻吟打开双腿做受动态图_制服丝袜熟女AV天堂_边摸边吃奶边做爽动态_三年片大全免费观看_福利一区三区_中文字幕无码91加勒比_男女做高清无遮挡免费视频_曰本凹凸AⅤ视频在线_日本久久精品影片_亚洲精品无码MⅤ在线观看

ElectriCorr VpCI-238 forms a thin film of Vapor phase Corrosion Inhibitors effective against aggressive environments including industrial, marine, and tropical climates. This film does not alter the electrical resistance or magnetic properties of metal substrates. ElectriCorr VpCI-238 can be safely applied to protect circuits or relays without causing any changes in conductivity. It can be safely used with most plastics, elastomers, and other non- metallics.

ElectriCorr VpCI-238 is an effective inhibitor of galvanic corrosion for most metals and alloys normally found in electronics applications, such as aluminum, copper, ferrous, and other non-ferrous metals. ElectriCorr VpCI-238 is free of CFCs
and 1,1,1-Trichlorethane. Application provides instant corrosion protection. In cases where severe corrosion may occur, ElectriCorr VpCI-238 can be used along with VpCI-100 series impregnated foam devices for extended protection.

FEATURES
•Instant corrosion protection
•Long-term multi-metal protection
•Minimized field service
•Increased corrosion protection at a lower cost than conventional rust preventatives
•CFC- and 1,1,1-Trichlorethane-free
•Vapor phase protection in vented or unvented enclosures
•May be used as a cleaning agent
•Moisture-displacing and penetrating film characteristics
•NSN #6850-01-413-9361 (aerosol form)

TYPICAL APPLICATIONS
•Printed circuit boards
•Electrical contacts and components
•Electric motors
•Corrosion protection of different metals in humid environment
•Generators and junction boxes
•Spray for use after final assembly or in the field

INDEPENDENT TESTING
ElectriCorr VpCI-238 has been tested by a world- renowned laboratory under accelerated conditions per the Batelle Flowing Mixed Gas Test in a Class III
environment. The results showed excellent multi-metal protection equivalent to a 7-years protection interval in an indoor electronics environment.

APPLICATION
Dip part to be cleaned in VpCI-238 or spray with ElectriCorr VpCI-238. Remove excess by drip, wipe, or other conventional method. Dry time is approximately
1-2 hours at 700F and 50% relative humidity. Forced air is not recommended due to possible condensate and/or compressor oil contamination.

The amount of ElectriCorr VpCI-238 necessary to maintain a sufficient concentration of vapors will depend on factors such as the efficiency of sealing enclosures (air circulation), volume of the enclosure, atmospheric conditions, and the density/porousness of the walls.

Application is effective for 6+ months with proper controls.

PACKAGING AND STORAGE
ElectriCorr VpCI-238 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and  bulk. ElectriCorr VpCI-238 is also available in aerosol form, packaged in cartons of six 9.45 oz (267.75 gram) cans. ElectriCorr VpCI-238 should be kept from high temperatures and in normal warehouse conditions to
prevent from freezing. ElectriCorr VpCI-238 has a shelf- life of 3+ years in sealed packages.

PHYSICAL PROPERTIES
Appearance Clear yellow liquid Non-volatile Content 7-10%
Density 6.5-6.8 lb/gal (0.77-0.81 kg/l)
Flash Point 143½0F (62½0C)