Qingdao Kede Shengdi
The General Agent in China authorized by CORTEC
135-0535-2885
Service Hotline
VpCI-368 Solvent Based Temporary Coating
市 場 價：￥0
優(yōu) 惠 價：￥1
庫 存：0
PRODUCT DESCRIPTION：
VpCI®-368 is a fast drying, solvent- based temporary wax-like coating that provides protection in harsh, outdoor, unsheltered applications yet is easily removed with alkaline cleaners such as VpCI®-414. Provides multi-metal protection. Can be matched to some custom colors.
E-Mail：zzgvci@163.com
商品詳細(xì)
Commercial equivalent to MIL– PRF – 16173E (Grades 1 & 2); NATO 6850-66-132-5848, 6099;NSN 8030-00-062-6950, 231-2345, 244-1300, 470-2601.
PACKAGING & STORAGE
VpCI®-368 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) metal drums, liquid totes, and bulk.
To ensure best product performance, store in original packaging, indoors, and out of direct sunlight at 40-100 °F (4-38 °C).
Shelf life: 2 years
CHARACTERISTICS/TECHNICAL DATA
|
Volume Solids |
52.30% |
|
Gloss (ASTM D532) |
NA |
|
VOCs (ASTM D3960) |
2.9 lbs/gal (347 g/L) |
|
Viscosity |
60-70 sec+ Zahn#3 |
|
Pencil Hardness (ASTM D3363) |
NA |
|
Spreading Rate |
838 sq.ft./gal @ 1.0 mils DFT (20.5 sq.m/L @ 25 μm) |
|
Weight per Gallon |
7.63 lbs/gal (0.91 kg/L) |
|
Flash Point |
158 °F (70 °C) |
|
Recommended DFT |
2.0-3.0 mils (50-75 μm) |
|
Recommended WFT |
4.0-6.0 mils (100-150 μm) |
|
Dry to Touch |
30 min |
|
Dry to Handle |
60 min |
|
Recoat Time |
NA |
|
Force Dry |
15-20 min @ 150 °F (65 °C) |
|
Full Cure |
3-7 days |
|
Salt Spray (ASTM B117) |
1500 hrs |
|
Humidity (ASTM D1748) |
2500 hrs |
|
Adhesion (ASTM D3359) |
NA |
|
Flexibility (ASTM D522) |
½" mandrel (1.27 cm) |
APPLICATION
Surface Preparation
Substrate should be free of grease, oil, dirt, fingerprints, drawing compounds, rust inhibitors (except Cortec® ap- proved), or any other surface contamination that could affect adhesion. Cortec® recommends a minimum of a SSPC-SP1 over painted surfaces. For bare metal applications, Cortec® recommends a NACE #3/ SSPC-SP6. Consult Cortec® Tech- nical Service and/or test system adhesion prior to full scale application.
Power agitate to a uniform consistency using a “squirrel cage” type mixer, hand-held drill mixer, or other equivalent meth- od. VpCI®-368 can be applied by spray, roll, brush, or dip.
Typical Equipment Setups
HVLP / Conventional Spray
•Tip 0.02”-0.11” (0.5-2.8 mm)* dependent upon pressures and viscosity
•Air Pressure 45-55 psi
•Fluid Pressure 10 psi
•Fluid hose should be ?” (0.95 cm) I.D. with a maximum length of 50 feet (15.2 m). ¼” (0.64 cm) I.D. fluid hose can be used but pressures may need to be adjusted. Pot should always have dual regulation and be kept at same elevation as spray gun.
Air Assisted Airless / Airless
•Tip 0.015”-0.035” (0.38-0.89 mm)* dependent upon pres- sures and viscosity
•Pressure 1800-2500 psi
•Hose should be ?” (0.95 cm) I.D. minimum, but a ¼” (0.64 cm) I.D. whip end section may be used for ease of applica- tion. A maximum length of 100 feet (30.5 m) is suggested.
*All tests performed after a 7 day cure at ambient temperature
Cleanup
Clean tools/equipment immediately after use with butyl acetate when coating is still wet. When dry, use butyl cellu- solve or MEK. Follow mfg’s safety recommendations when using any solvent.
Qingdao Cortec Rust Proof Materials Co., Ltd.,
Consultation hotline：0532-80989502
Sales Hotline：135-0535-2885
E-mail：zzgvci@163.com
QQ：592192408
Address：Room 2073, No. 12, chongmingdao East Road, Qingdao Economic Development Zone
Alibaba store：https://shop1420649126784.1688.com
Qingdao Cortec Rust Proof Materials Co., Ltd., the General Agent in China authorized by CORTEC Mobile phone：13505352885 Telephone：0532-80989502 Website：qkvkrai.cn Mailbox：zzgvci@163.com Alibaba shop link click on the entrance Address：Room 2073, No. 12, chongmingdao East Road, Qingdao Economic Development Zone